The manual panel is a function template used to check the appearance or structure rationality according to one or more product appearance drawings or structure drawings without opening the mold At present, handboards are called the first board in different places.

　　通常，剛開發或設計的產品需要手工制作。 手動板是驗證產品可行性的步。 找出設計產品的缺陷，不足和缺點，以改善缺陷是更直接，更有效的方法。 直到您無法從各個手樣本中找到缺陷為止。 在這一點上，通常有必要進行小批量的試生產，以找出需要改進的批量不足之處。 成品不能甚無法使用。 有缺陷的直接生產將被報廢，這將浪費人力，物力和時間。 手通常是少量樣品，生產周期短，人力和物力低。 快速找出產品設計的不足之處并加以改進，為產品定型和批量生產提供充分的依據。

　　Usually, newly developed or designed products need to be handmade The manual panel is the first step to verify the feasibility of the product It is the most direct and effective way to find out the defects, deficiencies and shortcomings of design products and improve them Until you can't find the defect in each hand sample At this point, it is usually necessary to carry out small batch trial production to find out the deficiencies of the batch that need to be improved The finished product can't be perfect or even used Defective direct production will be scrapped, which will waste manpower, material resources and time Hand is usually a small number of samples, short production cycle, low manpower and material resources Quickly find out the defects of product design and improve them, so as to provide sufficient basis for product finalization and mass production.
   　　喜歡請關注我們的山東快速成型的網站哦 文本來源于：http://m.networkcoms.cn

　　Like, please pay attention to our website of Shandong rapid prototyping. The text comes from: http://m.networkcoms.cn