Handboard models and parts processing are very common in the industrial market. It is also a process that product R & D must go through. Only when the handboard is done well can it be made in batch, which can help enterprises reduce R & D costs and risks and quickly seize the market. What materials should be used to make the newly designed hand board model to meet the requirements of the designer? We list some commonly used hand model making materials, analyze their characteristics, and you can easily know what kind of materials you need.

手板模型換個零件加工所用的材料主要分為金屬和塑膠，其中金屬*常見的就是鋁合金和不銹鋼這兩種，鋁合金的密度低，但強度較高，加工性能、優良的焊接特點及電鍍性、良好的抗腐蝕性、韌性高及加工后不變形、材料致密無缺陷及易于拋光、上色膜容易、氧化效果等優良特點，經過噴砂氧化處理之后，外觀效果會更好。不銹鋼耐空氣、蒸汽、水等弱腐蝕介質，耐酸、耐堿性能，密度高、耐腐蝕的特性比較好、不易損壞。

The materials used for the processing of another part of the handboard model are mainly divided into metal and plastic, of which metal * is commonly aluminum alloy and stainless steel. Aluminum alloy has low density but high strength, processing performance, excellent welding characteristics and electroplating, good corrosion resistance, high toughness and no deformation after processing, dense material without defects and easy polishing, easy coloring film Oxidation effect and other excellent characteristics, after sand blasting oxidation treatment, the appearance effect will be better. Stainless steel is resistant to weak corrosive media such as air, steam and water, acid and alkali resistance, high density, good corrosion resistance and not easy to be damaged.

塑膠常用的材料有ABS、POM、PMMA、PA、PC、PP、PPS等，

Commonly used plastic materials include ABS, POM, PMMA, PA, PC, PP, PPS, etc,

其中，ABS是一種工程塑料，在手板行業中比較常用的塑膠材料，抗沖擊性、耐熱性、耐低溫性、耐化學藥品性及電氣性能優良，還具有易加工、制品尺寸穩定、表面光澤性好等特點，可以拆件加工，可以滿足各行業產品的基本要求。

It is a kind of plastic products with good impact resistance and heat resistance, which can meet the basic requirements of various industries. It can also meet the requirements of plastic products in terms of low-temperature processing and heat resistance. It can also be used in the electrical industry.

POM：又叫賽剛，看這個名字就知道，是一種表面光滑且光澤度較好的硬而致密的材料，彎曲強度、耐疲勞強度，耐磨性都比較好，適合做一些齒輪的零件。

POM: also known as saigang, it is a hard and dense material with smooth surface and good gloss. It has good bending strength, fatigue strength and wear resistance. It is suitable for making some gear parts.

PMMA:俗稱亞克力，透明度較好，透明效果比PC材料好，且耐熱性優良。

PMMA: commonly known as acrylic, it has good transparency, better transparency effect than PC material, and excellent heat resistance.

PA：又稱為尼龍，機械強度高，韌性好，不粘膠水，不建議拆件加工。PC:沖擊強度高，尺寸穩定性好，無色透明，著色性好、耐磨性好，可以耐高溫，是一種透明材料。

PA: also known as nylon, it has high mechanical strength and good toughness. It does not stick glue. It is not recommended to disassemble parts for processing. PC: it has high impact strength, good dimensional stability, colorless and transparent, good coloring and wear resistance, and can withstand high temperature. It is a transparent material.

PP:聚丙烯，密度小，強度剛硬，硬度耐熱性均優于低壓聚乙烯，可在溫度100°左右使用。

PP: polypropylene, with small density, rigid strength, hardness and heat resistance, is better than low-pressure polyethylene, and can be used at a temperature of about 100 °.

PPS:是一種耐高溫材料，可以在230度的溫度下不會產生變形。通過以上的手板制作材料性能特點介紹你清楚了自己的手板模型該用什么材料制作了嗎?如果還有疑問，請聯系我們。

PPS: it is a kind of high temperature resistant material, which can not deform at 230 degrees. Through the introduction of the performance characteristics of the above hand board making materials, do you know what materials your hand board model should be made of? If you have any questions, please contact us.